Espar D9W

Coolant pump - 12V

This coolant pump is used on 12 volt D9W and Hydronic 10 heaters.

• Also listed in:
• Espar Hydronic 10
• Espar D9W

Combustion blower motor

This combustion blower motor is used on the D9W/Hydronic 10 - 12 volt heaters. Make sure to also order blower motor seal p/n 25.1816.01.0004

• Also listed in:
• Espar Hydronic 10
• Espar D9W

Blower seal

This blower motor seal fits between the combustion blower motor and burner housing. This should be replaced anytime the heater is disassembled for cleaning or blower motor replacement

• Also listed in:
• Espar Hydronic 10
• Espar D9W

Flame sensor

This flame sensor fits all D9W and Hydronic 10 model heaters. Works in both 12 and 24 Volts heaters. This sensor DOES NOT work in the new M2 series.

• Also listed in:
• Espar Hydronic 10
• Espar D9W

Burner

This burner tube is used on all of the D9W/Hydronic 10 heaters, 12 or 24V

• Also listed in:
• Espar Hydronic 10
• Espar D9W

Temperature sensor

This temperature sensor fits all D9W and Hydronic 10 heaters, 12 or 24 volt models

• Also listed in:
• Espar Hydronic 10
• Espar D9W

Burner seal

This burner seal fits between the burner tube and the burner housing. It should be changed anytime the burner tube is replaced. This seal kit fits all D9W/D10W/Hydronic 10 models

• Also listed in:
• Espar Hydronic 10
• Espar D9W

Safety cut out switch

This safety cut out switch is also reffered to as the overheat switch. This switch works only on the 25.1815.05 and 25.1816.05 D9W heaters. 12 and 24 volt.

• Also listed in:
• Espar D9W

Glow pin - 12V

This glow pin fits all of the D9W/D10W/Hydronic 10 - 12 Volt models.

• Also listed in:
• Espar Hydronic 10
• Espar D9W

Control unit - 12v

This control unit works properly only with the earlier 25.1996 - D9W versions