This gasket is used to seal the heat exchanger cover to the heat exchanger. It fits the B1LC/B1LCC/D1LC/D1LCC. It should always be replaced whenever heater is disassembled
This seal ring is used all B1LC/B1LCC and D1LC/D1LCC heaters. It should be replaced anytime the heater is disassembled for cleaning
This glow plug current regulator, monitors glow plug current to prevent over voltage at the glow plug. This particular regulator fits only the B/D1LC, the B/D1LCC and B/D3LCC - 12 volt models
This fuel metering pump fit all 12 volt B/D1LC and B/D1LCC heaters. It also fits the B/D3LC and B/D3LCC Gas and diesel
This 24 volt glow plug fits all B1LC thru Airtronic 5 - 24 volt heaters
This blower motor is used on all 12V - B1LCC/D1LCC (compact) models. It will not fit the older B1LC/D1LC models (external control unit)
This flame sensor will fit the B/D1LCC and B/D3LCC (compact) heaters. It will not fit the older ""LC"" family if heaters (external control unit)
This blower motor fits the 24 volt B/D1LCC heaters only. This is a 24 volt blower motor
This glow plug is used in the D1LC thru D8LC 12 volt heaters. It is also used the in late model D5W (25.1732.05)and D7W (25.1807.05) 12 volt heaters
Displaying 1 to 9 (of 9 products)