Espar D1LC

Lower casing

This lower casing will only fit the D1LC heaters. It will not fit the D1LCC models. Remember to order the 131 31 051 rivets to reassemble the casing

Gasket

This gasket seals the blower motor to the heat exchanger casing. It fits both the D1LC and D1LCC models

Glow plug screen

This glow plug screen is used on the D1LC and D1LCC heaters - diesel only

• Also listed in:
• Espar D5LC
• Espar D1LC
• Espar D1LCC
• Espar D5L

Control unit 12V

This control unit is used only for the D1LC heater model 25 1830 01 00 00 - 12 volt

• Also listed in:
• Espar D1LC

Safety inlet screen

This safety screen fits the B1LCC, the D1LCC and the Airtronic D2 inlet. This safety screen is necessary if return ducting is not used to protect occupants and fan motor

• Also listed in:
• Espar D1LC
• Espar Airtronic D2
• Espar B1LC

Fuel metering pump

This fuel metering pump is used on all 12 volt D1LC model heaters. It does not work on the D1LCC or Airtronic series

• Also listed in:
• Espar D1LC

Gasket - heat exchanger

This gasket is used to seal the heat exchanger cover to the heat exchanger. It fits the B1LC/B1LCC/D1LC/D1LCC. It should always be replaced whenever heater is disassembled

• Also listed in:
• Espar D1LC
• Espar B1LC
• Espar D1LCC
• Espar B1LCC

Printed circuit board

This printed circuit board is used only in the 25.1835.01 - 12 volt heater

Seal ring

This seal ring is used all B1LC/B1LCC and D1LC/D1LCC heaters. It should be replaced anytime the heater is disassembled for cleaning

• Also listed in:
• Espar D1LC
• Espar B1LC
• Espar D1LCC
• Espar B1LCC

Blower motor

This combustion blower motor is used on the D1LC model heaters p/n 25.1830.01. It will not fir the D1LC Compact models (D1LCC)

• Also listed in:
• Espar D1LC